Fire-Lite Firelite Honeywell NAC 6 Amp Power Supply. FL-PS6

The PS Series is a remote power supply line from FireLite Alarms and is a direct replacement for the FCPS-24FS6/8 Series. The FLPS6(C) is a 6 amp and the FL-PS10(C) is a 10 amp, remote power supply with battery charger that may be connected to any 12 or 24 volt fire alarm control panel (FACP) or used as a standalone power supply._x000D__x000D_The PS Series provides 24 VDC power for NACs (notification appliance circuits) configured as either Class B or Class A (requires the ZNAC-PS option card) with multiple sync protocol options. The PS Series also provides auxiliary power, constant or resettable, suited for detectors, annunciators, door holders, and other fire alarm system peripherals. The PS Series cabinet can hold two 7 AH or 18 AH batteries and can charge up to 33 AH batteries in a separate cabinet._x000D_Main Features_x000D__x000D_ Up to five (6 amp model) or seven (10 amp model) independently-configurable, power-limited output circuits for:_x000D_ Class B and/or Class A NACs_x000D_ Class B and/or Class A resettable or non-resettable 24V auxiliary power_x000D_ door holder power_x000D_ Converts from Class B to Class A wiring without losing any outputs using the ZNAC-PS converter card (sold separately)_x000D_ Optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated power_x000D_ Configurable for ANSI Temporal 3 or Temporal 4 coded output_x000D_ UL-Listed NAC synchronization using System Sensor, Wheelock, Gentex, or AMSECO appliances_x000D_ Synchronization can be triggered from FACP NAC/remote sync outputs, cascaded power supply, or a control module, single or multi, which may be housed within the power supply cabinet_x000D_ Ability to cascade up to four power supplies_x000D_ Two (6 amp model) or three (10 amp model) fully-isolated input/ control circuits which can be programmed to any output_x000D_ Two Form C normally-closed trouble relays for AC Trouble and General Trouble, Ground Fault relay